*** START OF THE PROJECT GUTENBERG EBOOK 67428 ***

     TYPOGRAPHIC TECHNICAL SERIES FOR APPRENTICES—PART VIII, NO. 55




                      TYPE AND PRESSES IN AMERICA
 A BRIEF HISTORICAL SKETCH OF THE DEVELOPMENT OF TYPE CASTING AND PRESS
                     BUILDING IN THE UNITED STATES


                                   BY
                      FREDERICK W. HAMILTON, LL.D.
                           EDUCATION DIRECTOR
                      UNITED TYPOTHETAE OF AMERICA

[Illustration]

                PUBLISHED BY THE COMMITTEE ON EDUCATION
                      UNITED TYPOTHETAE OF AMERICA
                                  1918




                            Copyright, 1918
                      United Typothetae of America
                             Chicago, Ill.


              Composition and electrotypes contributed by
                              POOLE BROS.
                                Chicago




                                CONTENTS


                                                     PAGE
               INTRODUCTION                             5

                               CHAPTER I
               THE PIONEER TYPE FOUNDERS                8

                               CHAPTER II
               THE ESTABLISHMENT OF TYPE FOUNDING      14

                              CHAPTER III
               COMPOSING AND TYPE-CASTING MACHINES     29

                               CHAPTER IV
               ELECTROTYPING                           32

                               CHAPTER V
               THE DEVELOPMENT OF THE PRINTING PRESS   34




                              INTRODUCTION


A study of type founding and of the development of presses and other
printers’ machinery in America presents many interesting considerations.
If the attempt were made to give in detail the story of American type
founding and the accomplishments of the notable American type founders,
and at the same time to chronicle the improvements and inventions which
American genius has contributed to the machines and processes used in
printing and the allied industries, a very large book might readily be
produced. While such a book would not be without interest and would
certainly have very great value, it would be valuable mainly as a work
of reference and would lack the interest which ought to attach to a book
of the sort contained in this series. It has seemed to the writer best,
therefore, not to attempt to collect an encyclopedia of information, but
to give a brief sketch of the development of types and presses in the
United States, with a special view to the beginnings in both
departments. It is greatly to be hoped that a more competent hand may
later be set to the production of such an encyclopedic volume as has
been indicated, but such a work does not belong in this series.

In these matters, as in so many others, we find a definite course of
development going on. Originally American dependence upon Europe was
complete. The political dependence of the colonies in those days was
much more thorough-going than anything we know at present. The political
and economic ideas of the eighteenth century were so different from
those with which we are familiar that it is difficult for the ordinary
man who is not widely read in the literature and history of that period
to understand them at all. Briefly it may be said that the prevailing
idea, not only in England, but elsewhere, was that all colonies should
be governed from the mother country; that they should send their raw
materials to the mother country and receive all of their manufactured
products from the mother country; and that they should not trade
directly with any other part of the world, but that the mother country
should act as a receiving and forwarding station for trade in both
directions. This dependence extended much further than to politics and
business. The American colonists, for example, got their literature,
their art, their fashions, and many of their ideas from the mother
country. The nearer the good people of Boston, New York, and
Philadelphia could get to the ways of thinking, speaking, dressing, and
acting which prevailed in London, the happier they considered
themselves.

Accordingly we find that at first type and presses were all imported.
Later we find that although type founding was being successfully carried
on in this country, foreign models, especially in type, long continued
to be followed. In machinery, American independence very soon asserted
itself. Although some important machines and presses were not invented
in this country, many were invented and nearly all were materially
improved in American hands. This remark applies to the machines for
producing type as well as to other mechanical operations. In the matter
of type faces and typographical design America followed English models
until comparatively recently. Indeed, it may be questioned whether there
are more than a very few type faces now in use in this country which can
be said to be American inventions. Many type faces have been designed,
however, which were modifications and improvements of European designs.
So true is this that probably the greater part of the type in use in
this country would be considered as of American design, although its
indebtedness to Caslon, to Baskerville, to Bodoni, or to Jensen, as a
remote original, might be recognized. As a matter of fact, the original
designing of letter faces, regardless of any previously existing design,
has been of very rare occurrence in this country. Within the last
generation, however, we are pretty well emancipated from this following
of foreign originals. We still study the products of the foreign type
foundries and printing offices, but as sources of suggestion, not as
models for imitation.

The great American printing houses of today are more and more the
masters of their own craft, not the imitators of others. This condition
is also true of the type founders and manufacturers of machines and
materials used in the industry. The sentiment of independence is bound
to become more marked, and the originality of American printing more
pronounced, with the development of a generation of better printers.




                               CHAPTER I
                       THE PIONEER TYPE FOUNDERS


During all the early years of American printing, as has already been
said, all type used was imported. The first type cast in this country
appears to have been made by Christopher Sauer, in Germantown,
Pennsylvania, about 1735. Sauer (the family afterward anglicized the
spelling of the name into Sower) was one of those Germans, colloquially
known as Pennsylvania Dutch, who were an important element in the
population of the colony of Pennsylvania and are still numerous in the
State. Sauer printed books, and in 1739 we find him beginning a
newspaper, all or nearly all in German. As an auxiliary to his printing
business he seems to have cast his own German type or at least a part of
it. His work had no particular commercial importance, but deserves
record as the beginning of type founding in America.

In 1768 a Scotchman named Mitchelson came to Boston bringing the tools
for type founding with him. We have no record that he ever cast any
type. Probably he lacked capital to go into business and there was no
one to employ him.

In 1769 Abel Buel submitted to the Legislature of Connecticut a document
printed from the first English type known to have been made in the
United States. This sheet, which is still in the archives of
Connecticut, is printed in a very well-cut long primer (ten-point) roman
of Buel’s own casting. We have no evidence that Buel ever cast a great
deal of type, but his personality is so interesting, and his character
so typical of the proverbial “Connecticut Yankee” that it is worth while
to recall the story of his life.

Buel appears to have been born in Connecticut, not far from 1750, and
apparently early learned the printing trade. With more than his share of
youthful irresponsibility, though he appears not to have been a really
bad man at heart, he proceeded to counterfeit the State currency of
Connecticut. This was not a difficult operation, as the early colonial
currency was printed from ordinary type with stock ornaments upon
ordinary paper by means of the ordinary printing press. The first
definite record that we find of him is that he was pardoned in 1766 from
a life sentence for counterfeiting these bills. The lesson that he got
on this occasion seems to have cured him not only of counterfeiting, but
of printing, as he apparently never again did either, although it was by
no means the last time that he found himself at odds with the
authorities.

He then invented a method of polishing crystals and precious stones. The
amount of this valuable material in the hands of the good people of
Connecticut was apparently not sufficient to afford him a livelihood,
and we find him next engaged as an undertaker and a singing master. In
this latter connection he was summoned before the authorities by certain
good people who were greatly scandalized because while in charge of a
church choir he had introduced the use of a bass viol into the services.
This was deemed little short of blasphemy, but apparently no technical
charge could be sustained against the culprit.

Buel early interested himself in the cause of the freedom of the
colonies. Meantime he had evidently been experimenting in type founding,
for the petition of 1769 sets forth that the petitioner has discovered
the art of casting type, but that he lacks the capital and is,
therefore, unable to go into business commercially. He accordingly
petitions the Legislature to advance to him the necessary funds. The
Legislature voted him a loan of £100 for seven years and promised him
£100 more after he had been carrying on the business successfully for
one year. As we shall see in a moment, before the year was out Buel’s
interest transferred itself elsewhere and we hear no more of his type
casting. When the seven years were up Mrs. Buel paid back the £100.
Where and how she raised it is something of a mystery, as she asserted
when she made the payment that she did not know where her husband was.
He was not permanently lost, however.

Buel, as we have seen, had interested himself in the cause of American
independence, and in 1770 he was arrested for participating in the
tearing down of a lead statue of George III which had stood in New York.
With true Yankee thrift Buel tried to combine his patriotism and his
type founding, for a considerable portion of George III was found in
Buel’s house in the process of being cast into type. Things were not
lively enough in Connecticut to suit our friend. He went to Boston,
where we find him participating in the Boston Tea Party, serving a
cannon in the Concord fight, and wounded at Bunker Hill. Later he fell
into the hands of the British and was confined in one of the prison
ships of unhallowed memory which were moored in Wallabout Bay, Brooklyn.
Very likely he was in one of those floating wooden tombs when his wife
declared that she did not know where he was. How long he remained as a
prisoner of war and what his later military experiences were we do not
know.

We hear of him next, after the war was over, being appointed to make a
map of the coast from Maine to Florida and then appointed master of the
mint for Connecticut, where he devised and erected the machinery for
striking the copper cents then coined. One wonders if the master of the
mint often thought of his youthful conviction for counterfeiting the
money of the same community.

Later, when the world was becoming interested in cotton spinning under
the stimulus of Arkwright’s invention, Buel went to England to learn how
to spin cotton. He came back, bought some machinery, and set up in New
Haven the second cotton mill in America, the first being Samuel Slater’s
mill in Pawtucket, Rhode Island. This seems to have been the last shift
in Buel’s varied life. He died in 1825 at the age of about seventy-five.
He was an interesting product of his time and its conditions and as such
his story deserves record, for it must be remembered that he was not a
“sport,” but a “type.”

In 1774 Jacob Bay attempted type founding in Philadelphia, but he also
was apparently only an experimenter.

In 1775 an experiment was made which, from the conditions and from the
character of the maker, we should expect to find successful, but which
failed nevertheless. At this time Benjamin Franklin brought out from
France a full set of tools and punches and undertook, with his
son-in-law, Bache, to establish a type foundry, there being then no type
founding done in this country if we may except what was being done in
Sauer’s establishment. The Franklin-Bache foundry was well equipped with
roman, italic, Greek, and Hebrew matrices. Bache had received some
instruction from Fournier, the great French type founder, from whom
Franklin had purchased the tools. They had for their workman a man named
Frederick Geiger. Geiger was what is known as a “redemptioner,” or a man
who in return for his passage money to America, his board, and a small
amount of money wages agreed to be the bond servant of his creditor for
a certain period. These arrangements were very common at this time and
reflected no discredit upon the young men who made them. Geiger was a
mathematical instrument maker by profession, but became with study and
practice a very expert matrix cutter and founder. Franklin had brought
him out and he served his time with Franklin, but appears to have left
him as soon as his time was out and to have gone to the Philadelphia
mint. Like many another skilled mechanic, however, he became interested
in the search for a perpetual motion machine and finally died an insane
pauper.

For some reason, the Franklin foundry was not successful. It has been
conjectured that one reason may have been that Franklin was very much
influenced by French models in his designs, and that the printers and
the reading public were so accustomed to English type faces that they
did not take kindly to the new forms. Curiously enough American printers
have never taken kindly to French type faces although many of them, from
Garamond down, are very beautiful. Some of the French types designed,
not far from 1875, seem to have become Americanized and are among the
most legible and beautiful in use, but the American printers have never
been very willing to use them. Whatever the reason, the Franklin foundry
was added to the list of unsuccessful attempts at type founding.

One more attempt was to be made before type founding was permanently
established in America. This time the attempt was successful, but not
permanent. In 1783 John Bain (or Baine) sent his grandson to
Philadelphia with an outfit of type founder’s tools. Bain had been
associated with one of the famous type founders of the time, Alexander
Wilson, of Glasgow. Wilson not only had a market in Scotland and
England, but also in Ireland and in North America. Bain had been chosen
by lot to start a foundry in Dublin, but after remaining there a time he
went to Edinburgh, whence he turned his attention to the other side of
the Atlantic. Encouraged by the reports from his grandson, Mr. Bain soon
went, himself, to Philadelphia. He was further encouraged by the firm of
Young & McCullough, then a leading house of Philadelphia printers. In
1785 he opened business under the quaint title of John Bain & Grandson
in Company. Their work was good and the firm was immediately successful,
theirs being the first commercially successful attempt to cast type in
America. Bain, however, died in 1790, and the business was soon given up
by his family.

About the same time that Bain began business Adam Gerard Mappa made an
unsuccessful attempt to start a foundry in New York. Mappa was born in
Belgium in 1750. He spent his early life in the army, from which he
retired after twelve years of service with the rank of lieutenant. He
then purchased a part interest in the old firm of Voskens & Clerk. This
firm was established some time before 1677, and had long been one of the
principal sources of supply of type for England. As pointed out
elsewhere in this series (No. 52, A Short History of Printing in
England) many of the types used in England for a long period came from
continental foundries, particularly Dutch. Shortly after the purchase
the Government underwent important changes, in consequence of which
Mappa left the country. He landed in New York somewhere about 1787,
bringing with him his complete outfit of tools and matrices. He had a
number of very handsome Dutch and German faces, some ordinary roman
type, and seven varieties of Orientals. For these last Voskens & Clerk
undoubtedly had found considerable use, but America was as yet far from
needing any considerable supply of Oriental types. Mappa’s capital had
apparently been absorbed in his purchase and lost in emigration. In 1798
he was very ready to take himself and his equipment into the service of
Binney & Ronaldson. Probably Mappa had no practical knowledge of type
founding and very little interest in it, for he left the service of
Binney & Ronaldson in 1800 to go into that of the great Holland Land
Company. He seems there to have found his place and served in important
positions until the end of his life.




                               CHAPTER II
                   THE ESTABLISHMENT OF TYPE FOUNDING


So far our story has been one of failure. There is, however, plenty of
evidence that the time was ripe for success. The new country was growing
rapidly. The Americans, then as now, were insatiable readers, especially
of newspapers. The demand for type was constantly increasing. America
was becoming more and more independent, more and more desirous of
supplying her own wants, and more and more impatient of the
inconvenience, expense, and delay involved in ordering such merchandise
as type from England. If the persistency and courage of the elder Bain
had been shared by his family unquestionably fortune would have been
easily within their grasp, but they paid the penalty of their lack of
good business qualities.

We come now to the story of the first permanently successful type
foundry in America, a foundry which continued in vigorous existence
until the erection of the Jersey City foundry of the American Type
Founders Company, with which it was merged. There met one day in an ale
house in Philadelphia two men whose lives were thenceforth to run
together. I suspect that they were drawn together in the first place by
the fact that they were both Scotchmen, and that in their first contact
they showed each other the qualities which bound them together. They
were Archibald Binney and James Ronaldson. Binney had learned and
practiced the trade of type founding in Edinburgh, Scotland. Ronaldson
was a biscuit-maker, out of business because of the burning of his
establishment, but with some ready money in hand. It seemed to Binney
that here was a heaven-sent opportunity to combine his knowledge with
Ronaldson’s capital and enter under the most favorable circumstances the
business of type founding. At this date there was no active foundry in
America. The successful Bain concern had been closed out. The Sauer
business, if active at all at this time, was only an adjunct to a
printing office, while Mappa was finding it impossible to get started.
They accordingly agreed to enter the business as equal partners, Binney
putting in his tools, which were appraised at $888.88, while Ronaldson
put in the same amount in cash.

With this they started business, the first entry in their account book
being November 1, 1796. We learn that they rented a frame house on
“Cedar Street atwixt ninth and tenth streets” at $17.33 a month. In 1800
the frame house was valued at $40.00 and cost $82.09½ “to shove it to
its present location.” It must be remembered that at this time a
half-cent coin was in circulation and that accounts were kept down to a
quarter of a cent. At the time of the moving of the house the firm
bought the property and built a new house on the same lot. The new house
cost $2,500 and they paid $72 a year ground rent, apparently for
additional land not included in the purchase. Entries in their first
account book show that one or both members of the firm lived in the
house. They started with a small assortment of type, but of the most
important faces. These faces appear to have included brevier
(eight-point), bourgeois (nine-point), long primer (ten-point), small
pica (eleven-point), pica (twelve-point), and some two-line letters.
They probably employed as matrix cutter one Fürst, a die maker in the
Philadelphia mint, who afterward cut a medal bearing Binney’s face on
the obverse and an appropriate design on the reverse.

At an early period, as we have seen, they took over Mappa and his
outfit, and in 1799 they bought the tools of the Bain concern, paying
$300 for them. In 1806 the excellent Franklin outfit was in the hands of
a man by the name of Duane. Duane became interested in Binney &
Ronaldson and offered to lend them any of the Franklin tools and
matrices which they desired to use. Ronaldson was so impressed with the
superiority of a part at least of the Franklin equipment that, fearing
that Duane might change his mind and not being willing to take any
chances, he himself borrowed a wheelbarrow and moved the material over
to Cedar Street in the middle of a very hot summer day.

Binney & Ronaldson were enterprising, thrifty, and obliging. They did
good work, took good care of their customers, and were immediately and
permanently successful. They prospered greatly from the beginning and
both of them made fortunes, as fortunes went in those days, within
twenty years.

A study of their account books is extremely interesting. Among other
things they give the names of 114 customers who found their way onto
their books in the first five years of the business. It would hardly be
worth while here to give the names of these customers, but it is
interesting to see where they were. They were located as follows:

          Philadelphia                                     49
          Pennsylvania (outside of Philadelphia)            6
          New York City                                    22
          Albany, New York                                  1
          Delaware                                          4
          Virginia                                          7
          New Jersey                                        2
          Maryland                                          4
          District of Columbia (Washington and Georgetown)  2
          Connecticut                                       1
          Massachusetts (Concord)                           1
          Georgia                                           1
          Augusta (state not given; probably Georgia)       1
          Tennessee (Knoxville)                             1
          Location not given                               12

In 1811 Binney invented an improved type mold which increased the output
of the caster fifty per cent and saved labor. He experimented with a
machine for rubbing type, but in this was not successful.

In 1812 Binney & Ronaldson published a specimen book which is
interesting as showing the development of their business. This book
shows eleven faces larger than pica, fifteen kinds of body type, the
smallest being pearl (5 point), two sizes of Anglo-Saxon, four sizes of
Greek, four sizes of Hebrew, two sizes of German text, six sizes of
black letter, three sizes of German, four sizes of Oriental letter, one
size of script and 120 kinds of “flowers” or borders, the greatest
number of these being on English (14-point) body. It is not unlikely
that some if not all of the foreign letters may have come from the
Franklin and Mappa stocks. We know that Franklin had Greek and Hebrew
and that Mappa had German. Mappa’s Orientals did not appear. Probably
even if Binney & Ronaldson still had the matrices it would not have been
worth while to include them in their specimen book. The preface says
that they were obliged, contrary to their inclinations, to imitate
European taste. Evidently America had not yet become independent except
politically. They gave two examples of erroneously formed faces in long
primer and small pica, which were really condensed faces as we should
now call them. They appear to have invented the dollar mark $ in 1797
and the abbreviation l̶b̶ for weight pounds in 1798.

In 1819 Mr. Binney retired with an ample competence. Mr. Ronaldson ran
the business alone for a while, but in 1823 he was succeeded by his
brother Richard, who conducted the business for ten years.

In 1833 the business was taken over by Lawrence Johnson and George E.
Smith. Johnson was able, enterprising, and energetic, and introduced new
vigor into the conduct of the concern. Contemporaneously with Jedediah
Howe he introduced stereotyping into Philadelphia. Smith retired in 1845
and Johnson took in as partners Thomas MacKellar, John F. Smith, and
Richard Smith, young men who had grown up in the business and were
thoroughly interested in it and devoted to it. The firm continued to
prosper greatly. Johnson died in 1860, but his partners took in Peter A.
Jordan, changing the firm name to MacKellar, Smiths & Jordan. By this
time the house had acquired a great reputation and a leading position
among American type founders. Mr. Johnson died in 1884 and the next year
the firm was still further increased by the addition of William B.
MacKellar, G. Frederick Jordan and Carl F. Huch. The firm name was again
changed to The MacKellar, Smiths & Jordan Company. During all this time,
however, the house was known among printers as the Johnson Type Foundry.
For many years it had acquired great distinction for its diligence in
electrotyping foreign designs as well as in originating new faces for
ornamental types and borders. The fashion of the time for typographical
decoration was largely developed by the publication of a house organ
called the “Typographic Advertiser,” a quarterly journal, edited by
Thomas MacKellar, which contained a fund of matter of interest to
printers and a vast quantity of fanciful borders and other material now
out of fashion.

In 1892, when the American Type Founders Company was organized by the
consolidation of some twenty foundries, the MacKellar, Smiths & Jordan
Company entered the combination and became the Philadelphia branch.

Now that we have told the story of this great house in detail, we may go
back to consider some more of the early firms. The success of Binney &
Ronaldson was due to a combination of personal qualities and favorable
conditions. The increase of printed matter was very great. Americans
have always been a newspaper-loving people, and after the independence
of the colonies the founding of new newspapers went on apace. It must
not be forgotten that all printing in the early days of the last century
was done with foundry type, hand set. The demand for type, therefore,
was not only large, but was increasing. Up to the outbreak of the war of
1812 the few type foundries in America were regularly from three to four
months behind their orders, so greatly did demand outrun production.

Under such circumstances Binney & Ronaldson could not have the field to
themselves. In 1805 we find Samuel Sower & Company at work at Baltimore.
Sower belonged to the family of Christopher Sauer, and used the material
of the old firm with additions. He made some fonts of roman and italic
and appears to have made a specialty of small type faces such as diamond
(4½-point), brilliant (4-point), and excelsior (3-point).

In 1809 the second permanently successful foundry was started by Elihu
White and a man by the name of Wing in Hartford, Connecticut. Here again
we have a sample of characteristic Yankee courage, resource, and
ingenuity, qualities which have enabled Americans at all times to
accomplish the apparently impossible. Neither White nor Wing knew the
business of type founding. They had certain ideas of their own and for
the rest they apparently worked backward from the finished type. Their
attempt was to cast several letters at once, to be afterwards separated,
instead of casting the letters singly as was the general practice.
Probably partly for that reason and partly because of ignorance, perhaps
also because of their confidence in their ability to improve on accepted
methods, they did not use the approved moulds. The attempt to cast
letters by wholesale, as it were, was not successful and their entire
progress was slow and unsatisfactory. After many failures, they sent a
man to Philadelphia in order that he might learn the trade secrets. In
those days type founding, like many other trades, was to a great extent
a secret trade and one of the chief duties of the workman was to keep
his employer’s secrets. Their attempt to steal the trade failed and they
were thrown back upon their own resources again. Finally, however, their
efforts were crowned with success and they began to turn out
commercially successful type. In 1810 White separated from Wing and went
to New York, where he and his brother Julius established a business
under the firm name of E. & J. White. From this time on they were
steadily and brilliantly successful.

In 1820 they opened branches in Buffalo and in Cincinnati to meet the
requirements of an expanding trade. The business remained in the family
until 1854, when it was bought out by three employees who continued it
under the later well-known firm name of Farmer, Little & Co.

Another famous name in the annals of American type founding appears at
about the same time as that of White. This was the name of Bruce. David
Bruce was born in 1750, in Wick, Caithness, Scotland. When a mere boy
Bruce was impressed into the British navy after the bad old custom of
that day and served for a while in the Channel Fleet under the command
of Lord Howe, afterwards well known, together with his brother General
Howe, for their part in the Revolutionary War. After he left the navy
Bruce was apprenticed to a printer. He came to New York in 1793 and
obtained work on a newspaper. Shortly afterward he sent for his brother
George and apprenticed him to a printer.

In 1806, after George had become a journeyman printer, the brothers were
offered by publishers the printing of Lavoisier’s Chemistry. The fact
that they had no plant, no equipment, and no money did not deter them
from accepting the offer. Bruce managed somehow to secure a place and a
press, and he borrowed a font of type. He introduced the standing press
for dry pressing his sheets, and he turned out so good a piece of work
that the publishers offered him all the printing that he could do. From
this start he set up a successful business.

In 1811 Bruce, with his usual business acumen, recognized the importance
of stereotyping and went to England to study it. As we have seen,
however, it was not easy to learn other people’s trades in those days
and Bruce met with great difficulty. He did, however, succeed in
learning something from a Scotch workman, perhaps helped by a certain
sense of kinship, which is common among the Scotch, and returned home to
make experiments for himself. Times were not favorable for keeping
business running, to say nothing of starting new business. The
conditions preceding the war of 1812 were disastrous for business in the
United States. American commerce was crushed between the upper and
nether millstones of England and France, who had been at war for many
years and were attempting to fight each other’s commerce and industries
as well as each other’s soldiers. The condition was very similar to that
which preceded the entrance of the United States into the great war of
1917, excepting that it continued much longer and, owing to the
comparative weakness of the United States, was much more serious than
the later difficulty. The war did not mend things industrially and its
close in 1815 left the United States in a bad business condition for a
good many years. Nevertheless, the courage and persistency of the Bruces
enabled them to weather the storm, and they not only held their own but
developed along new lines.

In 1814 and 1815 Bruce produced the first two sets of stereotype plates
made in America. They were a common school testament in bourgeois type
and a 12mo Bible in nonpareil. Bruce invented a machine for planing the
backs of the plates to make them of uniform height. This was a great
improvement and was so successful that it is said that of the entire two
sets of plates only a single plate needed a slight overlay.

The development of the stereotyping process, however, brought to light
difficulties with type. Foundry type was sold with the shoulder beveled
off for ordinary printing and this was not favorable for stereotyping.
The type founders would not make the high spaces and quads which were
needed. As the best way of meeting these difficulties, Bruce, in 1815,
went into company with the Starr brothers for the manufacture of type.
It soon appeared that type founding and stereotyping promised to be more
profitable than printing and Bruce sold out his printing establishment
to devote himself to the other branches. Bruce and the Starrs were
unable to agree and the partnership was soon dissolved, Bruce deciding
to carry on the business alone in spite of the difficulties of every
sort which surrounded it. In addition to the business conditions of the
time, neither of the Bruces had any practical knowledge of type founding
and the matrices of their only complete font were stolen, presumably by
someone who was interested to secure their failure. It needed more than
that, however, to discourage this persistent Scotchman. George Bruce set
himself at work to learn punch cutting and mould making. His first
efforts were crude, but he had an artistic temperament, a critical
spirit, and a practical knowledge of printers’ needs. By these qualities
and his own persistence he soon became very proficient.

By 1820 the Bruce foundry was the best in the country, doing better work
than even Binney & Ronaldson at that time. In 1822 Bruce undertook to
remedy the confusion in sizes which was then and for a good many years a
source of difficulty, annoyance and expense to printers. He devised a
scientifically correct system by which the size doubled with every seven
sizes of the system. This was uniform throughout, so that wherever you
touched the system, you found any given type twice as large as the
seventh below and half as large as the seventh above. In spite of the
fact of the simplicity and scientific correctness of the system it did
not prove suited to commercial work and was not adopted.

In 1828 William M. Johnson had invented a type-casting machine in which
a pump forced the liquid metal into the mould, giving the type a sharper
face than was possible with hand casting. The machine was a step in the
right direction, but was crude and imperfect. White took it up and tried
to improve it, but he did not succeed in removing its fundamental
defects. The types were not cast solid. Being hollow they were light and
too weak to withstand the pressure of the presses. The first successful
type-casting machine was made by David Bruce, Jr., in 1838, in
development of the Johnson idea. George Bruce bought David Bruce’s
patents and used the machine until 1845, when David Bruce made further
improvements and produced the type of machine which is now in general
use not only in this country but in Europe, where the method was soon
adopted.

James Conner, a printer of New York, began business as a stereotyper in
that city in the year 1827. His was the first stereotype edition of the
New Testament. He also earned a good reputation as the publisher in the
United States of the Bible in folio form. To the business of
stereotyping he soon after added that of type founding, in which he was
remarkably successful. With the aid of Edwin Starr, then in his employ,
he made the electrotype matrices which enabled him largely to increase
the stock of his foundry. After the death of James Conner, in 1861, the
foundry was managed by his sons and grandsons, who finally merged the
business in that of the American Type Founders Company.

Meantime the business of type founding spread from its original centers
and new fields were occupied. By 1818 the Boston Type Foundry had been
founded by Beddington & Ewer, and undertook to cast types, set types,
and make stereotype plates. Samuel N. Dickinson was taught the trade of
a printer in the State of New York, but afterward was employed as a
compositor in the Boston Type and Stereotype Foundry. In 1829 he began
business as a master printer and in 1839 he began type founding after
having designed for an Edinburgh foundry a series of Scotch-cut letters.
The success of this face determined him to cast type for himself. In
1845 he had a full assortment of types and issued a specimen book.
Dickinson was not a strong man, however, and died of consumption in
1848, at the age of forty-seven. The business was continued by Sewall
Phelps and Michael Dalton. Both the Boston Type Foundry and the
Dickinson Type Foundry had unusually successful careers and were later
absorbed in the American Type Founders Company.

Type foundries were started in Albany, Buffalo, Pittsburgh, Louisville,
St. Louis, Cincinnati, Philadelphia, Baltimore, and in New York, where
there were at least seven foundries. This led to over-production,
competition, and the failure of many weak concerns, a condition of
things which was not entirely remedied until the organization of the
American Type Founders Company in 1892.

In 1840 Augustus Ladew and George Charles opened at St. Louis the first
foundry west of Cincinnati. This firm continued in successful operation
until it was merged into the American Type Founders Company at its
organization.

In 1806 Robert Lothian, of Scotland, tried and failed to establish a
type foundry in New York. His son George B. Lothian, who had been taught
the trade of stereotyping in the stereotype foundries of John Watts, of
New York, and B. & J. Collins, of Philadelphia, had also received
instruction from his father and from Elihu White in type founding,
undertook to establish a type foundry in Pittsburgh, Pennsylvania. It
was an unsuccessful enterprise and Lothian returned to New York. In 1822
he undertook to make type for the old firm of Harper & Brothers. The
face of Greek, which he cut for the Anthon Classical Series, was very
much admired. He died in 1851, but the foundry continued in business
under other hands until 1875.

The next year Louis Pelouze, the founder of a distinguished family of
type founders, started a business in Philadelphia. This was another of
the successes from both a commercial and artistic point of view, and was
another of the constituents of the American Type Founders Company.

The Boston Type Foundry, which started as a stereotyping plant, passed
through an experience as a co-operative concern under the direction of
the employees who owned the stock. As is usually the case with such
enterprises, it was unsuccessful until finally the majority of the stock
got into the possession of Gorham Rogers, from which time it was
operated as in the ordinary way and attained a high degree of success,
doing very fine work. Mr. Conner, foreman in this foundry, who had
started as a stereotyper in 1827, was sent to St. Louis to open a branch
establishment which was very successful and later became famous as the
Central Type Foundry. Conner invented an electrotype matrix to take the
place of the matrices which had formerly been made by driving a steel
punch into copper.

The Dickinson Type Foundry also did work of a very high grade. Perhaps
the most fortunate thing that ever happened to it was the entrance into
its service in 1868 of Mr. Joseph W. Phinney. Mr. Phinney was born in
1848, and after a varied experience as a printer in several places, went
to Boston in 1868, later entering the employ of the old Dickinson Type
Foundry, in the selling department. He soon distinguished himself in the
service of the Dickinson Company and after a time became one of its
partners. His skill, artistic taste, and ability soon made him one of
the leaders in type design as well as one of the great figures in the
type founding business. For many years Mr. Phinney has exercised an
influence for good in type founding which it would be difficult to
overestimate. On the establishment of the American Type Founders Company
in 1892 the Dickinson concern became one of the constituent firms and
Mr. Phinney’s leadership was recognized by his election to the position
of Vice-President of the new concern. Mr. Phinney has remained in Boston
as the head of the New England branch of the business and is one of the
active and leading officers of the great type founding company.


Certain improvements in the manufacture of type which have brought it to
its present perfection remain to be recorded. The most important of
these were made by Barth, Marder, Benton, and Nicholas J. Werner. Henry
Barth was born in Leipsic, Germany, in 1823, and learned the trade of
mathematical instrument maker. Before 1840 the Bruce type caster was
seen in Germany and (not being protected by German patents) was imitated
by German type founders. Barth was engaged by Brockhaus, one of the more
important German printers, who maintained his own bindery and type
foundry and now added a machine shop primarily for the purpose of
building Bruce machines. Barth spent several years in the employ of
Brockhaus making type foundry tools and had two years’ service in the
German navy. He came to America in 1849 and at first practiced his trade
as a maker of mathematical instruments, but before long connected
himself with the Cincinnati Type Foundry. Here he invented a machine to
cast type by direct steam pressure without the pump. The machine was
successful, but for various reasons did not come into general use. He
then built a 14 × 18 job press, long well known as the Wells jobber.
During his service with the Cincinnati Type Foundry the hand-casting
machines were entirely replaced by steam machines, and in 1853 he
invented the kerning machine. About the same time the first shaved leads
were made under Barth’s direction. At first the shaving was done on a
hand machine, but later he devised a steam shaving machine. During the
course of a long service to the industry Barth was the author of many
important inventions and improvements in the details of type founding.
He died in 1907.

To John Marder we owe the development of the American point system of
type bodies. The Marder system was not immediately adopted, but as
developed by later inventions its superiority was so great that in spite
of the trouble and expense involved in the standardization of type it
finally became universal.

L. B. Benton introduced the use of accurate unit width of type.
Previously the width of the letters had varied with each character. This
resulted in a multiplicity of widths of type. Benton’s theory was that
quicker typesetting and more uniform spacing could be obtained by having
the types standardized on a minimum number of widths and securing the
proper space between characters by modifying the shapes of certain
letters to conform to these widths. Benton’s type was popularly called
“self-spacing” although the name was misapplied. Another disadvantage
then existing was that similar style type faces from different foundries
did not line, and even the height-to-paper of types varied. Type sizes
which were supposedly the same, in reality varied considerably in
different foundries. The confusion and difficulty for the printer
arising out of this lack of standards may easily be imagined. Each
foundry had its own width and size of type, and in many cases its size
varied by a considerable fraction of a point from that of other
foundries. Very probably this condition was deliberately maintained by
some foundries for the purpose of holding the entire trade of their
customers, the idea being that if the types coming from different
foundries did not go together well the customer would naturally be led
to buy all of his type in the same place. The improvement of these
conditions was brought about by the introduction of the point system of
bodies, Benton’s unit width, and the perfection of the lining and unit
set systems now in use.

Some important foundries held out against these improvements for years,
but the demands of their customers, who perceived the great advantages
of the standardized type, finally compelled adhesion to the new system.
One important result of these changes was the invention of the
punch-cutting or engraving machine. The adoption of the improved system
required the production of a vast number of new punches which had
formerly been cut by hand. It was impossible to find enough skilled
workmen to meet this demand and the engraving machine now used for
making punches was accordingly devised by Benton.

The field for the artistic development of type is inexhaustible, but it
is difficult to imagine how type, as a mechanical product, can be
improved beyond its present condition. The completeness and perfection
of the system, the excellence of the machinery, and the skill in
processes which have been developed make the product apparently perfect.




                              CHAPTER III
                  COMPOSING AND TYPE-CASTING MACHINES


With the great expansion of printing in the early part of the nineteenth
century, and with the invention of greatly improved presses, there
appeared a natural impatience with the slow process of hand composition.
It seemed a strange comment on human inventiveness that while new
machines had been found for doing so many kinds of man’s work, while the
simple screw press of Gutenberg had developed into the steam-driven
platen and cylinder, and while so many improvements had been made in the
manufacture of type, the setting of type was exactly where it was in
1450. More than 350 years had introduced practically no changes in the
primary process of arranging type into words and sentences. What could
be done to apply human ingenuity to this process?

This question was asked by inventors all over the world. Naturally the
first line of approach to the answer was from the direction of a machine
which should mechanically take up the types and place them in the stick,
in other words, a mechanical composer or typesetting machine.
Unsuccessful attempts in this line were made as early as 1820 or 1822.
The experimenters were not deterred by failures and commercially
successful typesetting machines were finally invented, among which may
be named the Rogers, the Thorne, and the Simplex. The mechanical
typesetter was successful for certain kinds of work and went a long way
toward meeting the general need.

It would probably have been developed to the point of meeting it far
more fully had it not been for the epoch-making invention of the type
caster. The first successful type composing and casting machine to be
put on the market was invented by Ottmar Mergenthaler. Mr. Mergenthaler
was born in Germany in 1854, and there learned the trade of an
electrical instrument maker. In 1872, when he was eighteen years old, he
came in sight of the period when the law would call him into military
service. The war of 1870 with France was a very fresh memory. The
political stability of Europe seemed then much less assured than it did
at a later date. Young Mergenthaler had no desire to expose himself to
the danger of being called upon to participate in another great war.
Therefore, like many other young Europeans, he came to America to avoid
military service.

Arrived in this country, he worked for some time at his trade. The
turning point in his career came in 1876 when he was engaged as an
expert mechanic to work on the development of a typewriter transfer
machine in which a group of people were interested. His work on this
machine, although long continued, was not successful, but his study and
experimentation led him to conceive the idea of a type-casting machine
which should be controlled from a keyboard similar to that of a
typewriter, but larger on account of the greater number of characters
necessary. The first model was produced in 1884. The machine was far
from perfect, but was sufficiently developed to make it clear that he
was on the track of a revolutionary invention. Two years later, in 1886,
Mergenthaler produced his first successful machine. This was put into
the composing room of the New York Tribune. Whitelaw Reid, the
distinguished editor of the Tribune, afterward American ambassador to
Great Britain, and other wealthy gentlemen became interested in
Mergenthaler’s work and formed a syndicate, making a contract with the
inventor whereby he was hired to work for them with a share in the
profits of the business. The machine was named by Mr. Reid himself the
linotype because it cast a “line o’ type.” The great success of the
machine and the enormous growth of the business of manufacturing it are
too familiar to need description, while the consequences of the
invention in making possible an enormous increase in the output of
printed matter can hardly be estimated.[1]

Footnote 1:

  See Text Book No. 23, “Type-Casting and Composing Machines.”

Mr. Mergenthaler severed his active connection with the syndicate in
1888, although he continued interested in it and made from time to time
such minor improvements in the machine as suggested themselves to him.
He died in 1899 at the early age of forty-five.

While Mergenthaler was at work Tolbert Lanston was experimenting along
the lines of a different machine. His aim was not the production of a
machine which should cast type, by lines, but of a machine which should
cast type and spaces separately and at the same time arrange them in
galleys ready for taking proof. Obviously, the line slug is of use only
for the special purpose for which it was cast, while the separate types
cast by the monotype can be distributed just as if they were foundry
types and can also be used for hand composition. The type thus produced
is not quite as perfect as foundry type, but is substantially as useful
for many purposes.

Each machine has some advantages of its own and their use is dictated by
the result which it is desired to produce. The Lanston machine appeared
in 1892. These two machines are representative of the types of
type-casting machines in the market. Other successful machines of the
same general types have been invented and are in extensive use.




                               CHAPTER IV
                             ELECTROTYPING


Electrotyping is an American invention. As long ago as 1830 the
laboratory discovery was made that when copper was deposited upon the
side of a voltaic battery and then removed, it furnished a reproduction
of the surface upon which it had been deposited. In the development of
this discovery very interesting experiments in reproduction were
performed by Thomas Spencer of Liverpool, J. C. Jordan of London, and
Prof. Jacobi, a Russian. These experiments were purely scientific, with
no commercial end in view. In 1839 Joseph A. Adams, a wood engraver
connected with Harper & Brothers, the New York publishers, conceived the
idea of applying this principle to the printing industry and made an
electrotype from a wood cut which was used for a magazine illustration
in 1841. He also made the illustrations for Harper’s great family Bible,
which was published in 1842–1844. Adams’s method was to take an
impression of his block in an alloy of soft metal, probably largely
bismuth. The process, however, destroyed the block, and although
experimentally successful it was not commercially practicable. The
invention of Smee’s battery and the use of wax for the moulds made the
process commercially sound and practical.

In 1848 John W. Wilcox, of Boston, using these methods, began business
as the first commercial electrotyper and was successful from the
beginning. His first work contained all the essentials known for many
years. Improvements soon followed. In 1855 John Gay, of New York,
introduced the use of tin foil for soldering the back of copper shells
and the same year Adams invented a dry brush black-leading machine to
take the place of the hand method which had hitherto been necessary. In
1856 Filmer, of Boston, invented the process of backing up the shells by
holding the shell down with springs.

In 1868 Stephen D. Tucker invented the type of dry brush black-leading
machine which is now in use and ten years later Edward A. Blake, of
Chicago, invented the air blast black-leading machine.

As early as 1871 Silas P. Knight, of Harper & Brothers, invented the wet
black-leading process. It was successful, but, as sometimes happens,
attracted no particular attention. Its merits in comparison with other
methods do not appear to have been appreciated and the discovery was
forgotten for more than a quarter of a century. In 1908 Frank H.
Learman, of Buffalo, invented a wet black-leading machine which was
adopted by the industry and improved by later patents. The wet process
is now considered the best. Perhaps the greatest single step forward in
the development of the electrotype was the substitution of the dynamo
for Smee’s battery, a change accomplished by Leslie, of New York, in
1872.

R. Hoe & Company, of New York, were greatly interested in electrotyping
machinery and were leaders in encouraging its development and in putting
it on the market.




                               CHAPTER V
                  THE DEVELOPMENT OF PRINTING PRESSES


The development of printing machinery has already been described to a
considerable extent in two of the preceding volumes of this series (No.
6, Platen Printing Presses, and No. 7, Cylinder Printing Machines). It
may be worth while, however, to review briefly in this place the main
points of progress in this direction. As we already know, American
printers originally and for many years imported all their presses as
well as their type. This condition, however, could not be permanent. As
early as 1775 good presses were being made at Philadelphia and Hartford.
These presses were of the Blaeu or “Dutch” type. They were wooden
machines with stone beds and had undergone practically no change for a
couple of centuries. The best known builder of these old presses in
America was Adam Ramage, who came from Scotland to Philadelphia in 1790.
Ramage was not only a good workman, but of an inventive turn of mind,
and introduced several improvements, notably the substitution of an iron
bed for the stone one. The iron press was invented by Lord Stanhope, in
England, about the year 1800 and was the beginning of the improvements
in printing machinery which were to go so far in the course of a
century.

Mr. Henry L. Bullen is authority for the statement that no Stanhope
press was ever brought to America. The reason lies probably in the fact
that an American invented an iron press at about the same time. This was
George Clymer, of Philadelphia, who after much experimenting produced
the Columbian Press, an iron machine which came into general use in
England as well as in the United States about 1816. It was a complicated
machine, but in spite of its complexity was very durable and beautiful
as well as powerful. It was worked on the ordinary hand-lever principle,
but the leverage system gave a fine chance for the pressman’s skill. It
had wonderful possibilities in the production of the most perfect work
when in the hands of a skillful workman. It won and long kept
well-deserved favor. It was introduced into England in 1807, and in 1817
Clymer himself followed it to England, where he spent the remainder of
his life.

In spite of the capacity of the Columbian press for the production of
artistically perfect work there was a great and increasing demand for
presses of a different type. The demand was for a simpler press and also
for one that would mechanically turn out larger quantities of work than
were possible under the old leverage system. The first demand was met by
the invention of Peter Smith, of New York, who built a press somewhat on
the lines of the Columbian, which was very heavy, carried larger forms,
and used shorter levers, and by Samuel Reid, who, in 1824, invented the
simple but excellent Washington hand press, which is still in common
use.

From this point on there are two lines of development which may be
followed separately, one the development of the power printing press in
which the bed and platen are brought together by a power-driven gear
rather than by a hand-moved lever, the other the development of the
cylinder press.

The first known attempt to apply power to a printing press was made by
William Nicholson, of London, in 1790, in connection with his abortive
attempt at the invention of a cylinder press, to which reference will be
made later.

The first American attempt to use power was made by Nathan Hale, father
of the famous Edward Everett Hale, who took possession of the Boston
Advertiser in 1814.

Daniel Treadwell, of Boston, invented and built for Hale the first power
press used in America. It was a very large platen with a wooden frame.
The presses of Isaac Adams (1830) and Otis Tufts (1834) also had
originally wooden frames, but later were built with iron frames. Very
few Treadwell presses were ever used. At first they were driven by
horsepower, later by steam. The early power presses were worked by
horses, by men known as crank-men, and even in the case of small
machines by dogs. These crude power appliances soon gave way to steam,
and within a few years steam has been largely supplanted by the electric
drive, with a tendency to a preponderance of individual motor-driven
machines. The electric drive, by the way, is an American invention.

In 1830 Samuel Adams, of Boston, built a platen power press, which was
long the only power press capable of fine work and exact register. Not
long later S. P. Ruggles, of Boston, invented the Diamond, a small,
rapid machine for the quick production of cards, envelopes, and other
small work, and later, in 1839, the Ruggles rotary, a successful and
popular power jobber. In 1856 George P. Gordon began the line of Gordon
presses, still made in improved models by the Chandler & Price Company,
of Cleveland, and very extensively used. The advantages of the Gordon
were simplicity of design, a strong impression, high speed, and
lightness of running.

In 1869 Merritt Gally invented the Universal press, using a different
mechanical system and producing a perfectly parallel impression. Gally’s
invention was later improved by John Thomson, who produced a machine
which has been extensively used and is well known as the John Thomson
press. In 1875 Gally also invented a heavy press for embossing, cutting,
and creasing heavy stock. In 1885 the Colt’s Armory universal press, a
very excellent machine especially adapted to heavy work, was placed on
the market.

In 1885 Wellington P. Kidder invented a platen press of the Gordon type,
with automatic feed and delivery.

In 1890 Albert Harris invented the Harris press, the first really
successful high-speed automatic jobber. Two other familiar high-speed
presses, the Auto Press and the Kelly, are small high-speed cylinders.

The first known attempt to make a cylinder press was that of William
Nicholson, of London, who invented, in 1789, a machine that should apply
the paper to the type by means of a cylinder. As we have seen, Nicholson
went so far as to invent application of power to his machine, forseeing
that power would be necessary for the use of any successful cylinder
presses. Nicholson was not a printer, and his idea, although it had
attracted attention, did not assume practical shape.

Ten years, or so, later Dr. Kinsley, a Connecticut man, developed
Nicholson’s idea and produced a cylinder press, which is described at
considerable length by Isaiah Thomas in his History of Printing. Thomas
seems to have been a good deal interested in the machine, although he
appears to have regarded it as promising rather than successful. He says
that it saved labor and did good work. He was sufficiently interested to
print a picture of it although his book is not otherwise illustrated. In
a general way it was not unlike a modern cylinder proof press. It
printed on one side only and was not so arranged as to secure perfect
register if an impression was desired on the other side.

Several other attempts were made at the invention of cylinder presses,
which attracted considerable attention, but which were not commercially
successful. The first real success was made by Fredrick König, a native
of Saxony, who, in 1814, invented a cylinder press which was immediately
put into use in the press room of the _London Times_. König’s invention,
like most first inventions in a new field, was susceptible of
improvement, especially in the direction of simplicity. These
improvements, however, were soon made, and the cylinder press started on
its career of wonderful development. The first cylinder press used in
America was a Napier brought out from England in 1825, and set up in the
office of the _National Intelligencer_ in Washington.

The development of the cylinder press in America is largely connected
with the name of Hoe. Robert Hoe, a Leicestershire farmer’s son, was
born in 1784, and in due time was apprenticed to a carpenter. In 1803 he
came to New York, where he worked at his trade. After a time he became
associated in business with his brother-in-law, Matthew Smith, Jr. Smith
was a carpenter and a printer’s joiner (that is to say, a maker of press
frames and other wood work used by printers) and a brother of Peter
Smith, the press inventor, who has already been mentioned. Through this
association the firm got into the business of building presses, first of
wood and later of iron.

Both the Smiths died in 1823 and Hoe inherited the business, which he
carried on in the name of Robert Hoe & Company. Hoe was always
enterprising and his attention was quickly drawn to the Napier press,
which had been set up in Washington in 1825. As usual, this machine was
not patented in this country and Hoe proceeded to imitate it, with such
changes as occurred to him, and put on the market, in 1827 and 1828, the
first flat bed and cylinder press made in the United States.

Robert Hoe retired on account of failing health in 1832, but he left the
business in the capable hands of Richard M. Hoe and Matthew Smith, the
son of Matthew, Jr., Robert Hoe’s original partner. The concern went on
building and improving presses and in 1842 they patented a new
bed-driving motion of which the well-known Meihle press of today is a
development.

In 1845 Hoe & Company brought out the Hoe type-revolving machine. This
was the first press distinctively for large newspaper circulations,
which they afterward developed to so wonderful a degree, and which
henceforth was their leading line of production. In this machine the
type forms were imposed on turtles and fastened on a central cylinder,
against which revolved as many impression cylinders, from two to ten, as
were required. This machine put American printing machinery in the first
rank. In 1858 the Hoe firm bought out the Isaac Adams patents and
business.

About this time two other important inventions were made, both of which
were later utilized by the Hoes. In 1853 Pratt built for the Brooklyn
_Daily Advertiser_ the first perfecting press, or press printing both
sides of the paper without removing the sheet. In 1860 William Bullock
began to experiment on a rotary self-feeding or web printing press, and
finally succeeded in achieving success in 1865. The Bullock machine was
self-feeding, but cut the sheets from a web before printing.

In 1847 Hoe & Company began work on a rotary printing press to print
from the web without first cutting it into sheets. This involved all the
essential parts which had been discovered and gathered them into one
machine. The experiment was successful, resulting in the production of
the wonderful multiple press, which may be seen today in the press room
of any great newspaper.

The invention of the Hoe press, the development of the autoplate, a
machine invented in 1900 by Henry A. Wise Wood, of New York, whereby the
process of stereotyping is made in a practical way subsidiary to
newspaper printing, and the invention of wood pulp paper have made
possible the modern newspaper.


We have thus very hastily traced the process of development in types and
presses in the United States. Much might be said, if space permitted and
the purpose of this series required it, of the invention of other
presses, appliances, and methods, and of the improvements which are
constantly being made in the tools and materials used in printing and
the allied industries. These matters, however, are of only secondary
historic interest. So much as the apprentice needs to know about them he
will learn in the course of his work, as he comes in contact with them
and learns their use. Perhaps the purpose of this book has been
sufficiently accomplished in showing the milestones along the historical
development of the two great tools of the printer, his type and his
press.

The list which follows is a brief statement of the most important
contributions of American inventors to the art of printing:

 Web rotary presses.
 Automatic stereotyping machines.
 Printing machinery under electrical control.
 Two-revolution cylinder presses.
 Sheet feed rotary presses.
 Multicolor presses.
 Rotary direct and rotary offset presses for lithographic work.

This, of course, includes only the inventions which are fundamental and
original. Improvements of some fundamental invention, made elsewhere or
earlier, are not included, although in this connection it is worth while
to mention one important thing which owes to America almost everything
except its original invention. This is process printing, both in black
and white and in colors. Process printing was not an American invention.
It is safe to say that it would be only a scientific experiment if it
had not been made practical by American inventions, such as coated
paper, first made for half-tone work by the Cumberland Mills Company for
Mr. De Vinne, ruling machines for half-tone work, which were first made
by Max Levy, of Philadelphia, about 1880, and three-color process
plates, which were first made by Frederick Ives, of Philadelphia, in
1881.




                            REVIEW QUESTIONS
                SUGGESTIONS TO STUDENTS AND INSTRUCTORS

  The following questions, based on the contents of this pamphlet, are
  intended to serve (1) as a guide to the study of the text, (2) as an
  aid to the student in putting the information contained into definite
  statements without actually memorizing the text, (3) as a means of
  securing from the student a reproduction of the information in his own
  words.

  A careful following of the questions by the reader will insure full
  acquaintance with every part of the text, avoiding the accidental
  omission of what might be of value. These primers are so condensed
  that nothing should be omitted.

  In teaching from these books it is very important that these questions
  and such others as may occur to the teacher should be made the basis
  of frequent written work, and of final examinations.

  The importance of written work cannot be overstated. It not only
  assures knowledge of material, but the power to express that knowledge
  correctly and in good form.

  If this written work can be submitted to the teacher in printed form
  it will be doubly useful.


                               QUESTIONS

1. What general course of development do we find in the United States in
relation to European influence?

2. How has this worked out in the case of type and presses?

3. Who cast the first type made in this country?

4. Who was Mitchelson, the type founder, and what did he do?

5. Tell the story of Adam Buell.

6. Tell about Benjamin Franklin’s attempt at type founding.

7. Tell the story of the first successful type foundry in the United
States.

8. Tell of the attempt of Mappa to start a type foundry in the United
States.

9. What were the prospects for successful type founding in America about
1795?

10. Tell the story of the starting of the first permanently successful
type foundry in America.

11. What were the first steps taken to enlarge its facilities?

12. What inventions did the senior partner work on?

13. Give a brief sketch of the firm from the retirement of the senior
partner to the present time.

14. What other type founder was at work in 1805, and what was he doing?

15. Tell the story of the starting of the second successful type foundry
in the United States.

16. Who were the Bruces, and how did they start in business?

17. What did the Bruces do in 1814 and 1815?

18. How did the Bruces become type founders?

19. What improvement did the Bruces attempt in 1822, and with what
result?

20. What was W. M. Johnson’s invention, and what became of it?

21. What development took place in the type founding business, and what
was the result?

22. Who was Augustus Ladew, and what did he do?

23. Who was Louis Pelouze, and what did he do?

24. What can you tell about the Boston Type Foundry?

25. Tell about the work of J. W. Phinney.

26. Who was Henry Barth, and what did he do?

27. What do we owe to John Marder?

28. What do we owe to L. R. Benton?

29. What invention followed the work of Benton and Werner, and why?

30. What need became acute in composing room, and what was done to meet
it?

31. What invention changed the course of development along this line?

32. Tell the story of Ottmar Mergenthaler.

33. What did Tolbert Lanston invent?

34. Tell the story of the discovery of the electrotyping process.

35. Who was the first to apply this process to printing, and what were
the defects of his method?

36. Give a sketch of the development of the process of electrotyping,
naming five principal inventions with dates.

37. What was the greatest single step in advance, and when, where, and
by whom was it made?

38. Where did the first American presses come from?

39. How soon were presses made in America, and what were they like?

40. Who was the best known American press builder before 1800, and what
improvement did he make?

41. Who invented the iron press, and when?

42. Who invented the Columbian hand press?

43. What demand soon arose, and how was it met?

44. Who invented the Washington hand press and when?

45. What was the first attempt to use power in press operation?

46. What was the first American attempt to use power in press operation?

47. What sort of power was originally used?

48. Tell about the inventions of Adams, Ruggles, and Gordon.

49. Tell about the invention of Merritt Gally.

50. What were the inventions of Kidder and Harris?

51. What types of high-speed small presses are made?

52. What was the first attempt to build a cylinder press?

53. What was the first American attempt to build a cylinder press?

54. Who invented the first successful cylinder press?

55. Tell the story of Hoe & Co. down to 1845.

56. What important invention did Hoe & Co. bring out in 1845?

57. What were the inventions of Pratt and Bullock?

58. What did Hoe & Co. produce in 1847?

59. What did Henry A. Wise Wood invent?

60. Give a list of the most important American inventions in printing
machinery.

61. Why is the list not longer?




              TYPOGRAPHIC TECHNICAL SERIES FOR APPRENTICES


The following list of publications, comprising the TYPOGRAPHIC TECHNICAL
SERIES FOR APPRENTICES, has been prepared under the supervision of the
Committee on Education of the United Typothetae of America for use in
trade classes, in course of printing instruction, and by individuals.

Each publication has been compiled by a competent author or group of
authors, and carefully edited, the purpose being to provide the printers
of the United States—employers, journeymen, and apprentices—with a
comprehensive series of handy and inexpensive compendiums of reliable,
up-to-date information upon the various branches and specialties of the
printing craft, all arranged in orderly fashion for progressive study.

The publications of the series are of uniform size, 5 × 8 inches. Their
general make-up, in typography, illustrations, etc., has been, as far as
practicable, kept in harmony throughout. A brief synopsis of the
particular contents and other chief features of each volume will be
found under each title in the following list.

Each topic is treated in a concise manner, the aim being to embody in
each publication as completely as possible all the rudimentary
information and essential facts necessary to an understanding of the
subject. Care has been taken to make all statements accurate and clear,
with the purpose of bringing essential information within the
understanding of beginners in the different fields of study. Wherever
practicable, simple and well-defined drawings and illustrations have
been used to assist in giving additional clearness to the text.

In order that the pamphlets may be of the greatest possible help for use
in trade-school classes and for self-instruction, each title is
accompanied by a list of Review Questions covering essential items of
the subject matter. A short Glossary of technical terms belonging to the
subject or department treated is also added to many of the books.

These are the Official Text-books of the United Typothetae of America.

Address all orders and inquiries to COMMITTEE ON EDUCATION, UNITED
TYPOTHETAE OF AMERICA, CHICAGO, ILLINOIS, U. S. A.




             PART I—_Types, Tools, Machines, and Materials_


1. =Type: a Primer of Information= By A. A. Stewart

Relating to the mechanical features of printing types; their sizes, font
schemes, etc., with a brief description of their manufacture. 44 pp.;
illustrated; 74 review questions; glossary.

2. =Compositors’ Tools and Materials= By A. A. Stewart

A primer of information about composing sticks, galleys, leads, brass
rules, cutting and mitering machines, etc. 47 pp.; illustrated; 50
review questions; glossary.

3. =Type Cases, Composing Room Furniture= By A. A. Stewart

A primer of information about type cases, work stands, cabinets, case
racks, galley racks, standing galleys, etc. 43 pp.; illustrated; 33
review questions; glossary.

4. =Imposing Tables and Lock-up Appliances= By A. A. Stewart

Describing the tools and materials used in locking up forms for the
press, including some modern utilities for special purposes. 59 pp.;
illustrated; 70 review questions; glossary.

5. =Proof Presses= By A. A. Stewart

A primer of information about the customary methods and machines for
taking printers’ proofs. 40 pp.; illustrated; 41 review questions;
glossary.

6. =Platen Printing Presses= By Daniel Baker

A primer of information regarding the history and mechanical
construction of platen printing presses, from the original hand press to
the modern job press, to which is added a chapter on automatic presses
of small size. 51 pp.; illustrated; 49 review questions; glossary.

7. =Cylinder Printing Presses= By Herbert L. Baker

Being a study of the mechanism and operation of the principal types of
cylinder printing machines. 64 pp.; illustrated; 47 review questions;
glossary.

8. =Mechanical Feeders and Folders= By William E. Spurrier

The history and operation of modern feeding and folding machines; with
hints on their care and adjustments. Illustrated; review questions;
glossary.

9. =Power for Machinery in Printing Houses= By Carl F. Scott

A treatise on the methods of applying power to printing presses and
allied machinery with particular reference to electric drive. 53 pp.;
illustrated; 69 review questions; glossary.

10. =Paper Cutting Machines= By Niel Gray, Jr.

A primer of information about paper and card trimmers, hand-lever
cutters, power cutters, and other automatic machines for cutting paper,
70 pp.; illustrated; 115 review questions; glossary.

11. =Printers’ Rollers= By A. A. Stewart

A primer of information about the composition, manufacture, and care of
inking rollers. 46 pp.; illustrated; 61 review questions; glossary.

12. =Printing Inks= By Philip Ruxton

Their composition, properties and manufacture (reprinted by permission
from Circular No. 53, United States Bureau of Standards); together with
some helpful suggestions about the everyday use of printing inks by
Philip Ruxton. 80 pp.; 100 review questions; glossary.

13. =How Paper is Made= By William Bond Wheelwright

A primer of information about the materials and processes of
manufacturing paper for printing and writing. 68 pp.; illustrated; 62
review questions; glossary.

14. =Relief Engravings= By Joseph P. Donovan

Brief history and non-technical description of modern methods of
engraving; woodcut, zinc plate, half-tone; kind of copy for
reproduction; things to remember when ordering engravings. Illustrated;
review questions; glossary.

15. =Electrotyping and Stereotyping= By Harris B. Hatch and A. A.
Stewart

A primer of information about the processes of electrotyping and
stereotyping. 94 pp.; illustrated; 129 review questions; glossaries.




                 PART II—_Hand and Machine Composition_


16. =Typesetting= By A. A. Stewart

A handbook for beginners, giving information about justifying, spacing,
correcting, and other matters relating to typesetting. Illustrated;
review questions; glossary.

17. =Printers’ Proofs= By A. A. Stewart

The methods by which they are made, marked, and corrected, with
observations on proofreading. Illustrated; review questions; glossary.

18. =First Steps in Job Composition= By Camille DeVéze

Suggestions for the apprentice compositor in setting his first jobs,
especially about the important little things which go to make good
display in typography. 63 pp.; examples; 55 review questions; glossary.

19. =General Job Composition=

How the job compositor handles business stationery, programs and
miscellaneous work. Illustrated; review questions; glossary.

20. =Book Composition= By J. W. Bothwell

Chapters from DeVinne’s “Modern Methods of Book Composition,” revised
and arranged for this series of text-books by J. W. Bothwell of The
DeVinne Press, New York. Part I: Composition of pages. Part II:
Imposition of pages. 229 pp.; illustrated; 525 review questions;
glossary.

21. =Tabular Composition= By Robert Seaver

A study of the elementary forms of table composition, with examples of
more difficult composition. 36 pp.; examples; 45 review questions.

22. =Applied Arithmetic= By E. E. Sheldon

Elementary arithmetic applied to problems of the printing trade,
calculation of materials, paper weights and sizes, with standard tables
and rules for computation, each subject amplified with examples and
exercises. 159 pp.

23. =Typecasting and Composing Machines= A. W. Finlay, Editor

Section I—The Linotype By L. A. Hornstein

Section II—The Monotype By Joseph Hays

Section III—The Intertype By Henry W. Cozzens

Section IV—Other Typecasting and Typesetting Machines By Frank H. Smith

A brief history of typesetting machines, with descriptions of their
mechanical principles and operations. Illustrated; review questions;
glossary.




                  PART III—_Imposition and Stonework_


24. =Locking Forms for the Job Press= By Frank S. Henry

Things the apprentice should know about locking up small forms, and
about general work on the stone. Illustrated; review questions;
glossary.

25. =Preparing Forms for the Cylinder Press= By Frank S. Henry

Pamphlet and catalog imposition; margins; fold marks, etc. Methods of
handling type forms and electrotype forms. Illustrated; review
questions; glossary.




                          PART IV—_Presswork_


26. =Making Ready on Platen Presses= By T. G. McGrew

The essential parts of a press and their functions; distinctive features
of commonly used machines. Preparing the tympan, regulating the
impression, underlaying and overlaying, setting gauges, and other
details explained. Illustrated; review questions; glossary.

27. =Cylinder Presswork= By T. G. McGrew

Preparing the press; adjustment of bed and cylinder, form rollers, ink
fountain, grippers and delivery systems. Underlaying and overlaying;
modern overlay methods. Illustrated; review questions; glossary.

28. =Pressroom Hints and Helps= By Charles L. Dunton

Describing some practical methods of pressroom work, with directions and
useful information relating to a variety of printing-press problems. 87
pp.; 176 review questions.

29. =Reproductive Processes of the Graphic Arts= By A. W. Elson

A primer of information about the distinctive features of the relief,
the intaglio, and the planographic processes of printing. 84 pp.;
illustrated; 100 review questions; glossary.




                   PART V—_Pamphlet and Book Binding_


30. =Pamphlet Binding= By Bancroft L. Goodwin

A primer of information about the various operations employed in binding
pamphlets and other work in the bindery. Illustrated; review questions;
glossary.

31. =Book Binding= By John J. Pleger

Practical information about the usual operations in binding books;
folding; gathering, collating, sewing, forwarding, finishing. Case
making and cased-in books. Hand work and machine work. Job and
blank-book binding. Illustrated; review questions; glossary.




                 PART VI—_Correct Literary Composition_


32. =Word Study and English Grammar= By F. W. Hamilton

A primer of information about words, their relations, and their uses. 68
pp.; 84 review questions; glossary.

33. =Punctuation= By F. W. Hamilton

A primer of information about the marks of punctuation and their use,
both grammatically and typographically. 56 pp.; 59 review questions;
glossary.

34. =Capitals= By F. W. Hamilton

A primer of information about capitalization, with some practical
typographic hints as to the use of capitals. 48 pp.; 92 review
questions; glossary.

35. =Division of Words= By F. W. Hamilton

Rules for the division of words at the ends of lines, with remarks on
spelling, syllabication and pronunciation. 42 pp.; 70 review questions.

36. =Compound Words= By F. W. Hamilton

A study of the principles of compounding, the components of compounds,
and the use of the hyphen. 34 pp.; 62 review questions.

37. =Abbreviations and Signs= By F. W. Hamilton

A primer of information about abbreviations and signs, with classified
lists of those in most common use. 58 pp.; 32 review questions.

38. =The Uses of Italic= By F. W. Hamilton

A primer of information about the history and uses of italic letters. 31
pp.; 37 review questions.

39. =Proofreading= By Arnold Levitas

The technical phases of the proofreader’s work; reading, marking,
revising, etc.; methods of handling proofs and copy. Illustrated by
examples. 59 pp.; 69 review questions; glossary.

40. =Preparation of Printers’ Copy= By F. W. Hamilton

Suggestions for authors, editors, and all who are engaged in preparing
copy for the composing room. 36 pp.; 67 review questions.

41. =Printers’ Manual of Style=

A reference compilation of approved rules, usages, and suggestions
relating to uniformity in punctuation, capitalization, abbreviations,
numerals, and kindred features of composition.

42. =The Printer’s Dictionary= By A. A. Stewart

A handbook of definitions and miscellaneous information about various
processes of printing, alphabetically arranged. Technical terms
explained. Illustrated.




                PART VII—_Design, Color, and Lettering_


43. =Applied Design for Printers= By Harry L. Gage

A handbook of the principles of arrangement, with brief comment on the
periods of design which have most influenced printing. Treats of
harmony, balance, proportion, and rhythm; motion; symmetry and variety;
ornament, esthetic and symbolic. 37 illustrations; 46 review questions;
glossary; bibliography.

44. =Elements of Typographic Design= By Harry L. Gage

Applications of the principles of decorative design. Building material
of typography: paper, types, ink, decorations and illustrations.
Handling of shapes. Design of complete book, treating each part. Design
of commercial forms and single units. Illustrations; review questions;
glossary; bibliography.

45. =Rudiments of Color in Printing= By Harry L. Gage

Use of color: for decoration of black and white, for broad poster
effect, in combinations of two, three, or more printings with process
engravings. Scientific nature of color, physical and chemical. Terms in
which color may be discussed: hue, value, intensity. Diagrams in color,
scales and combinations. Color theory of process engraving. Experiments
with color. Illustrations in full color, and on various papers. Review
questions; glossary; bibliography.

46. =Lettering in Typography= By Harry L. Gage

Printer’s use of lettering: adaptability and decorative effect.
Development of historic writing and lettering and its influence on type
design. Classification of general forms in lettering. Application of
design to lettering. Drawing for reproduction. Fully illustrated; review
questions; glossary; bibliography.

47. =Typographic Design in Advertising= By Harry L. Gage

The printer’s function in advertising. Precepts upon which advertising
is based. Printer’s analysis of his copy. Emphasis, legibility,
attention, color. Method of studying advertising typography.
Illustrations; review questions; glossary; bibliography.

48. =Making Dummies and Layouts= By Harry L. Gage

A layout: the architectural plan. A dummy: the imitation of a proposed
final effect. Use of dummy in sales work. Use of layout. Function of
layout man. Binding schemes for dummies. Dummy envelopes. Illustrations;
review questions; glossary; bibliography.




                    PART VIII—_History of Printing_


49. =Books Before Typography= By F. W. Hamilton

A primer of information about the invention of the alphabet and the
history of bookmaking up to the invention of movable types. 62 pp.;
illustrated; 64 review questions.

50. =The Invention of Typography= By F. W. Hamilton

A brief sketch of the invention of printing and how it came about. 64
pp.; 62 review questions.

51. =History of Printing—Part I= By F. W. Hamilton

A primer of information about the beginnings of printing, the
development of the book, the development of printers’ materials, and the
work of the great pioneers. 63 pp.; 55 review questions.

52. =History of Printing—Part II= By F. W. Hamilton

A brief sketch of the economic conditions of the printing industry from
1450 to 1789, including government regulations, censorship, internal
conditions and industrial relations. 94 pp.; 128 review questions.

53. =Printing in England= By F. W. Hamilton

A short history of printing in England from Caxton to the present time.
89 pp.; 65 review questions.

54. =Printing in America= By F. W. Hamilton

A brief sketch of the development of the newspaper, and some notes on
publishers who have especially contributed to printing. 98 pp.; 84
review questions.

55. =Type and Presses in America= By F. W. Hamilton

A brief historical sketch of the development of type casting and press
building in the United States. 52 pp.; 61 review questions.




                 PART IX—_Cost Finding and Accounting_


56. =Elements of Cost in Printing= By Henry P. Porter

A primer of information about all the elements that contribute to the
cost of printing and their relation to each other. Review questions.
Glossary.

57. =Use of a Cost System= By Henry P. Porter

The Standard Cost-Finding Forms and their uses. What they should show.
How to utilize the information they give. Review questions. Glossary.

58. =The Printer as a Merchant= By Henry P. Porter

The selection and purchase of materials and supplies for printing. The
relation of the cost of raw material and the selling price of the
finished product. Review questions. Glossary.

59. =Fundamental Principles of Estimating= By Henry P. Porter

The estimator and his work; forms to use; general rules for estimating.
Review questions. Glossary.

60. =Estimating and Selling= By Henry P. Porter

An insight into the methods used in making estimates, and their relation
to selling. Review questions. Glossary.

61. =Accounting for Printers= By Henry P. Porter

A brief outline of an accounting system for printers; necessary books
and accessory records. Review questions. Glossary.




                         PART X—_Miscellaneous_


62. =Health, Sanitation, and Safety= By Henry P. Porter

Hygiene in the printing trade; a study of conditions old and new;
practical suggestions for improvement; protective appliances and rules
for safety.

63. =Topical Index= By F. W. Hamilton

A book of reference covering the topics treated in the Typographic
Technical Series, alphabetically arranged.

64. =Courses of Study= By F. W. Hamilton

A guidebook for teachers, with outlines and suggestions for classroom
and shop work.




                             ACKNOWLEDGMENT


This series of Typographic Text-books is the result of the splendid
co-operation of a large number of firms and individuals engaged in the
printing business and its allied industries in the United States of
America.

The Committee on Education of the United Typothetae of America, under
whose auspices the books have been prepared and published, acknowledges
its indebtedness for the generous assistance rendered by the many
authors, printers, and others identified with this work.

While due acknowledgment is made on the title and copyright pages of
those contributing to each book, the Committee nevertheless felt that a
group list of co-operating firms would be of interest.

The following list is not complete, as it includes only those who have
co-operated in the production of a portion of the volumes, constituting
the first printing. As soon as the entire list of books comprising the
Typographic Technical Series has been completed (which the Committee
hopes will be at an early date), the full list will be printed in each
volume.

The Committee also desires to acknowledge its indebtedness to the many
subscribers to this Series who have patiently awaited its publication.

              COMMITTEE ON EDUCATION,
              UNITED TYPOTHETAE OF AMERICA.

                  HENRY P. PORTER, _Chairman_,
                  E. LAWRENCE FELL,
                  A. M. GLOSSBRENNER,
                  J. CLYDE OSWALD,
                  TOBY RUBOVITS.

              FREDERICK W. HAMILTON, _Education Director_.




                              CONTRIBUTORS


=For Composition and Electrotypes=

 ISAAC H. BLANCHARD COMPANY, New York, N. Y.
 S. H. BURBANK & CO., Philadelphia, Pa.
 J. S. CUSHING & CO., Norwood, Mass.
 THE DEVINNE PRESS, New York, N. Y.
 R. R. DONNELLEY & SONS CO., Chicago, Ill.
 GEO. H. ELLIS CO., Boston, Mass.
 EVANS-WINTER-HEBB, Detroit, Mich.
 FRANKLIN PRINTING COMPANY, Philadelphia, Pa.
 F. H. GILSON COMPANY, Boston, Mass.
 STEPHEN GREEN & CO., Philadelphia, Pa.
 W. F. HALL PRINTING CO., Chicago, Ill.
 J. B. LIPPINCOTT CO., Philadelphia, Pa.
 MCCALLA & CO. INC., Philadelphia, Pa.
 THE PATTESON PRESS, New York, New York
 THE PLIMPTON PRESS, Norwood, Mass.
 POOLE BROS., Chicago, Ill.
 EDWARD STERN & CO., Philadelphia, Pa.
 THE STONE PRINTING & MFG. CO., Roanoke, Va.
 C. D. TRAPHAGEN, Lincoln, Neb.
 THE UNIVERSITY PRESS, Cambridge, Mass.

=For Composition=

 BOSTON TYPOTHETAE SCHOOL OF PRINTING, Boston, Mass.
 WILLIAM F. FELL CO., Philadelphia, Pa.
 THE KALKHOFF COMPANY, New York, N. Y.
 OXFORD-PRINT, Boston, Mass.
 TOBY RUBOVITS, Chicago, Ill.

=For Electrotypes=

 BLOMGREN BROTHERS CO., Chicago, Ill.
 FLOWER STEEL ELECTROTYPING CO., New York, N. Y.
 C. J. PETERS & SON CO., Boston, Mass.
 ROYAL ELECTROTYPE CO., Philadelphia, Pa.
 H. C. WHITCOMB & CO., Boston, Mass.

=For Engravings=

 AMERICAN TYPE FOUNDERS CO., Boston, Mass.
 C. B. COTTRELL & SONS CO., Westerly, R. I.
 GOLDING MANUFACTURING CO., Franklin, Mass.
 HARVARD UNIVERSITY, Cambridge, Mass.
 INLAND PRINTER CO., Chicago, Ill.
 LANSTON MONOTYPE MACHINE COMPANY, Philadelphia, Pa.
 MERGENTHALER LINOTYPE COMPANY, New York, N. Y.
 GEO. H. MORRILL CO., Norwood, Mass.
 OSWALD PUBLISHING CO., New York, N. Y.
 THE PRINTING ART, Cambridge, Mass.
 B. D. RISING PAPER COMPANY, Housatonic, Mass.
 THE VANDERCOOK PRESS, Chicago, Ill.

=For Book Paper=

 AMERICAN WRITING PAPER CO., Holyoke, Mass.
 WEST VIRGINIA PULP & PAPER CO., Mechanicville, N. Y.

------------------------------------------------------------------------




                          TRANSCRIBER’S NOTES


 1. P. vii, changed “The Standard Cost-Finding Forms and their uses.
      What they should show. How to utilize the information they give.
      Review questions. Glossary.” to “A primer of information about all
      the elements that contribute to the cost of printing and their
      relation to each other. Review questions. Glossary.” 
      [See https://www.gutenberg.org/ebooks/65596.]
 2. Silently corrected obvious typographical errors and variations in
      spelling.
 3. Retained archaic, non-standard, and uncertain spellings as printed.
 4. Enclosed italics font in _underscores_.

*** END OF THE PROJECT GUTENBERG EBOOK 67428 ***