Short: Download images from Fuji MX1200 digital cameras Author: Martyn Capewell (martyn@ntlworld.com) Uploader: Martyn Capewell (martyn ntlworld com) Type: gfx/misc Version: 1.0 Architecture: m68k-amigaos FujiGet - A small program to download images from Fuji MX1200 digital cameras. It was written because I bought a digital camera, then found that the software I was going to use to control it, FujiControl by Christian Falzon, didn't work. This software has been tested with an MX1200 on an A1200 with built in serial port. It may work with MX500s or MX700s, but I can't guarantee that. In fact, I can't guarantee it'll work with your MX1200 either. Your mileage may vary. It was hacked together in a few hours, so bugs are very likely. Thanks to: Thierry Bousch for info gleaned from his fujiplay package, at: http://topo.math.u-psud.fr/~bousch/fujiplay.html Mamoru Ohno for his protocol analysis, at: http://www.yk.rim.or.jp/~mamo/Computer/DS-7/detail-e.html Any comments, criticisms, bugs or suggestions can be sent to: martyn.capewell@ntlworld.com Usage info: ----------- FRAME/N/M = Download these images. ALL/S = Download all images. BASEDIR = Directory in which to put images. Default is current dir. LIST/S = Just list images in camera. BAUD/K/N = Connection speed to camera. Default is 57600. DEVICE/K = Exec device to use. Default is serial.device. UNIT/K/N = Unit number of device. Default is 0. Homepage -- http://members.xoom.com/legerdemain0/