Short: Ghostscript 8.70 Core (MorphOS binary) Author: Various, MorphOS port by Michal Zukowski Uploader: Michal Zukowski Type: gfx/conv Version: 8.60 Requires: gs870core.lha, gsfonts.lha from http://www.whoosh777.com/ or Aminet Architecture: ppc-morphos >= 3.10 This archive contains the Ghostscript 8.70 binaries for MorphOS 3.10+. You also need the core and font archives. This version won't work with older releases! Installation: To install Ghostscript 8.70 simply uncompress core archive, then the fonts archive followed by binary archive. Rename the GS870 drawer to "Ghostscript" and put it where ever you want to store it. This example uses "SYS:Applications" as place for the Ghostscript drawer. Open a text editor and insert the following lines at the end of your s:user-startup file: ;BEGIN Ghostscript assign gs: "SYS:Applications/Ghostscript" assign gs870: gs: assign gs870fonts: gs:fonts ;END Ghostscript Note: if you changed the path just adapt the first assign command to match your desired destination. If you paste and execute those lines in shell Ghostscript is ready for operation. Reboot has the same effect. To setup Turboprint enter Turboprint settings and open the post script page. Command line should contain (without "") this: "GS:bin/gs -sDEVICE=tp24 -q" TempDir must contain (without "") this: "ram:" Note: Make sure you press enter/return in each field to make TurboPrint store your values. Without it will forget your settings. Happy Printing...