Short: Use ZyXEL1496 as Answermachine/Fax/BBS Uploader: d1mag dtek chalmers se Type: comm/misc Architecture: m68k-amigaos System Requirements: Computer: Amiga 500/600/1000/1200/2000/3000/4000 AmigaDOS 2.0 and over. (AmigaDOS 2.1 for localization.) Harddisk is recommended. Modem: ZyXEL 1496, 1496E(+), 1496R, 1496S(+) ZyXEL ROM 5.04a++ Upgrade your ROM to 6.10a for better DTMF-detection and if you want to use ADPCM2/3 with syncpulses. VoiXEL isn't tested with ROM 6.11a yet, but it should work. Software: asl.library OwnDevUnit.device (Recommended, but not required) VoiXEL is mainly tested on: A4000/040 / 8Mb RAM / 235Mb HD Kickstart 3.0 ZyXEL 1496 E/E+ ROM6.10a but also A2000/000 512Kb Chip / 2 Mb Fast / 100Mb HD Kickstart 2.04 ZyXEL 1496 E/E+ ROM6.10a Summary of Features: * GUI-interface * Possibility to iconify VoiXEL and run it as a background task. * OwnDevUnit.device support. VoiXEL releases the serial port if any other task wants to use it. * Localized in different languages. (English, German, Swedish) * VoiXEL allows you to use the ZyXEL-modem as an answermachine. The answermachine is fully remotecontrolled so you can listen at all incoming voice calls from another telephone. * VoiXEL starts a FAX-program if a FAX call was detected. * VoiXEL starts a BBS-program or something else if the caller wants to Up-/Download files with another modem. * You can set a phonenumber where you actually are for the moment. If VoiXEL receives a message it will automatically call this number and deliver the message. * A password is required to enter the remote functions. * User-defined DTMF-keys in remote mode. * Convert ADPCM files to IFF files. * Convert IFF files (any sample frequence) to ADPCM2 or ADPCM3. * Manual record from Phoneline or External microphone. * Manual play to Amigaspeaker, Phoneline or Internal speaker. If you play a ZyXEL file to Amigaspeaker, you don't have to convert it to an IFF file. This is a nice feature when playing a 1Mb ZyXEL file... * All compression methods are used. (CELP, ADPCM2, ADPCM3, ADPCM2 with SYNC, ADPCM3 with SYNC) * Possibility to answer the first incoming call after 4 RING-signals, next call after 2 signals. Otherwise you could set it from 1 to 20 signals. * All incoming calls are displayed in a Loglist. Some information about the calls are displayed here, such as Date, calltype, length and callernumber (if Fax-type). You can very easy double-click to listen at a voicecall or viewing an incoming fax. * The demoversion doesn't include all functions such as: The loglist is limited to 2 incoming calls. If the loglist is full VoiXEL will play the outgoing message and then hangup. * The registrated version includes all implemented functions and: The Loglist is limited to maximum 200 incoming calls.